MI Journeyman Electrician study plan

Map the NEC structure: locate any cited Article, Part, or table using the table of contents and index in under 60 seconds

Distinguish mandatory (shall), permissive (permitted), and informational note language, and cite three examples of each

Identify Michigan licensing and Code-adoption administrative rules that govern journeyman scope of work

Compute a single-family dwelling service load with the Article 220 Part III standard method, showing every step

Size service-entrance conductors and service OCPDs using Article 230 and the dwelling service table allowance

Calculate feeder and neutral demand loads for a multifamily or commercial occupancy with the Article 220 optional method

Apply dwelling receptacle-spacing and small-appliance/laundry branch-circuit rules to a floor plan

Apply GFCI and AFCI protection requirements to specific branch-circuit locations

Determine conductor ampacity from the wet/dry location table and apply ambient-temperature and conduit-fill adjustment factors

Perform box-fill calculations for outlet, device, and junction boxes including conductor, device, and equipment-grounding allowances

Match occupancy and location conditions to an acceptable wiring method among NM, MC, AC, PVC, and EMT

Verify securing, supporting, and protection-from-physical-damage requirements for three wiring methods

Use the Chapter 9 conduit-fill and bending tables to select raceway size and verify raceway fill for mixed conductor sizes

Size motor branch-circuit conductors, short-circuit protection, and overload protection for a single-motor circuit

Connect disconnecting-means and controller requirements to a motor installation layout

Interpret equipment nameplate data to select branch-circuit conductors and overcurrent devices for HVAC equipment

Build a grounding electrode system from a site description and size grounding electrode conductors and bonding jumpers

Size equipment-grounding conductors for multiple circuits using the equipment-grounding conductor table and its adjustment rules

Apply tap-conductor and next-size-up rules to select and verify overcurrent device ratings

Differentiate grounding, bonding, and the grounded conductor at the service and at separately derived systems

Compare GFCI and AFCI requirements across dwelling, healthcare, aquatic, and assembly occupancies

Apply special-occupancy Articles to pool, patient-care, and emergency/standby system installations

Select wiring methods, boxes, and devices permitted in hazardous (classified) locations by class and division

Evaluate multiwire branch circuits, handle ties, and common-trip requirements for shared-neutral circuits

Complete 150 mixed practice questions under timed conditions, rotating across all five domains

Log every missed question by domain, root cause, and correct cited section

Re-drill the two lowest-scoring domains until accuracy exceeds 80 percent

Reduce average time per calculation question to under 90 seconds

Complete two full-length 80-question simulated exams under strict timing with only the Code book as reference

Memorize the table locations and standard values most frequently tested: ampacity, box fill, conductor fill, and grounding conductor sizing

Re-verify weak areas flagged in the week 7 error log until repeat accuracy is 90 percent or better

Assemble a final one-page reference sheet of section numbers and exceptions to review the morning of the exam