ND Asbestos Abatement study guide
ND Asbestos Abatement · Work through your exam, one topic at a time.
The North Dakota Asbestos Control Program, administered by the Department of Environmental Quality's Division of Waste Management, enforces the Emission Standards for Asbestos under the North Dakota Pollution Control Rules (NDAC 33.1-15-13). The program licenses asbestos abatement contractors and certifies individuals across six disciplines: abatement worker, contractor/supervisor, inspector, management planner, project designer, and project monitor. The ND Asbestos Abatement study guide has 6 sections and about 2,032 words.
01Asbestos Abatement Worker
This domain tests the worker's daily work practices inside a regulated area: containment discipline, wet methods, HEPA vacuuming, personal protective equipment, decontamination, waste handling, and exposure limits under OSHA 29 CFR 1926.1101 and NESHAP. Enter and leave only through the decontamination unit: equipment room, shower, clean room.
345 words, about 2 min02Asbestos Abatement Contractor/Supervisor
This domain tests project-level control: notification, regulated-area setup, enclosure performance, air monitoring, worker protection, waste shipment, and records. The supervisor must translate the project design into field conditions and stop work when containment or exposure controls fail.
352 words, about 2 min03Asbestos Inspector
This domain tests how an accredited inspector identifies suspect asbestos-containing materials, groups them into homogeneous areas, collects representative bulk samples, assesses condition, and documents findings in a report that others can rely on. Inspect all accessible suspect materials.
352 words, about 2 min04Asbestos Management Planner
This domain tests how an accredited management planner converts inspection data into a management plan: hazard assessment, priority setting, response actions, operations and maintenance, reinspection, and recordkeeping, especially in AHERA school settings. Use the inspector's report to assess hazard: friability, condition, accessibility, potential for disturbance, occupancy, and quantity.
341 words, about 2 min05Asbestos Project Designer
This domain tests the design of abatement projects: scope, regulated areas, containment, decontamination, ventilation, electrical and fire safety, waste routing, monitoring, and clearance criteria. The designer writes specifications that the contractor can build and the monitor can verify.
322 words, about 2 min06Asbestos Project Monitor
This domain tests independent oversight: verifying that the contractor follows the specifications, documenting conditions, conducting or overseeing air monitoring, performing visual inspections, and recommending clearance only when criteria are met. The monitor observes work practices, containment, decontamination, waste handling, and worker protection against the project design and regulations.
320 words, about 2 min