Norway Theory Test - Category C study materials
Norway Theory Test - Category C study resources

Norway Theory Test - Category C study plan

Norway Theory Test - Category C · Give each week a clear focus.

8 weeks · About 6 hours per week

Week 1

Traffic rules and road signs

  • Map every Norwegian road sign group (warning, priority, prohibition, mandatory, information) and state the action each demands in one sentence

  • Recite the general speed limits for built-up areas, rural roads, motorways and heavy vehicles, and list the situations where a lower posted limit overrides them

  • Explain right-of-way at unmarked junctions, roundabouts and exit-from-property situations, including the obligation to yield to pedestrians at crossings

  • Solve 60 mixed sign and priority questions and log every error with the rule that was missed

Your checkpoint

A one-page personal sign and priority cheat sheet plus an error log of at least 60 answered questions

Week 2

Traffic rules and road signs & Vehicle knowledge, load and driving technique for heavy vehicles

  • Apply overtaking, lane-use and turning rules to heavy vehicles, including turning radius, blind spots and the ban on overtaking where visibility is short

  • Describe the truck's braking system layout (service, parking, emergency, retarder) and explain how air-pressure loss and brake fade change stopping distance

  • Calculate stopping distance at 50, 60 and 80 km/h with reaction time plus braking distance, and compare laden versus unladen behaviour

  • Identify the main warning lamps and tell what each requires the driver to do immediately

Your checkpoint

A written stopping-distance table for three speeds with a short note on how load and road surface change the figures

Week 3

Vehicle knowledge, load and driving technique for heavy vehicles

  • Perform and document a pre-drive walkaround checklist covering tyres, lights, couplings, air pressure, load and tachograph

  • Explain how load placement affects axle loads, centre of gravity and rollover risk on curves and downhill sections

  • Describe correct downhill driving technique with engine braking and retarder, and explain why continuous service braking is avoided

  • Match gear and speed to gradient and load for a set of five realistic route scenarios

Your checkpoint

A completed 20-point pre-drive checklist and five written route scenarios with chosen gear, speed and braking method

Week 4

Safe driving, hazard perception and interaction with other road users

  • Scan and plan ahead using mirror checks, following distance and hazard anticipation for a vehicle of 18 tonnes or more

  • Explain the two-second rule and adjust it for rain, darkness, ice and full load

  • Describe interaction with cyclists, pedestrians, motorcyclists and children near schools, and how blind spots dictate positioning at junctions

  • Explain fatigue, alcohol, drugs and distraction effects on reaction time and name the legal limits and consequences

Your checkpoint

A hazard-perception log of 15 written scenarios, each with the hazard, the correct response and the reason

Week 5

Driving and rest time rules, tachograph and transport documentation & Cargo securing, load limits and vehicle dimensions

  • State the daily, weekly and two-week driving limits, the 45-minute break rule and the split-break options, and the daily and weekly rest requirements

  • Explain how to use a digital tachograph correctly, including manual entries, mode switches, printouts and what to do after a technical failure

  • Calculate axle and total load limits from given vehicle data and decide whether a described load is legal

  • Apply the rules for width, height, length and overhang, and state when a transport permit or escort is required

Your checkpoint

A solved set of 10 load and dimension calculations plus a written daily tachograph timeline for a sample working day

Week 6

Cargo securing, load limits and vehicle dimensions & Driver responsibilities, licensing rules and Norwegian transport regulations

  • Select and apply lashing, strapping and blocking methods for typical loads and explain the friction and pre-tension principles behind them

  • Check load security against the forces expected in braking and cornering, and describe the checks made during a journey

  • State which documents must be carried (driving licence, driver card, transport documents, ADR papers where relevant) and who may inspect them

  • Explain the driver's responsibility for the vehicle, the load and compliance, including penalties for overload and tachograph offences

Your checkpoint

A load-securing plan for three different cargo types with chosen equipment and a list of required documents for each

Week 7

First aid, fire safety and incident handling & Environment, economy and eco-driving

  • Perform the first-aid priorities at a crash scene: secure the site, alert emergency services, assess breathing and bleeding, and place an unconscious but breathing casualty

  • Explain how to use a fire extinguisher on a vehicle fire, when to attempt it and when to evacuate, including fires in the engine bay and on the load

  • Describe incident handling: warning triangle placement, reflective vest, reporting and securing the scene on a busy road

  • Apply eco-driving techniques (anticipation, smooth acceleration, correct gear, idle avoidance) and explain how they cut fuel use and emissions

Your checkpoint

A written emergency action card covering crash, fire and breakdown, plus a personal list of eight eco-driving habits with expected effect

Week 8

Traffic rules and road signs & Safe driving, hazard perception and interaction with other road users & Driver responsibilities, licensing rules and Norwegian transport regulations

  • Complete two full-length timed mock tests and review every wrong answer against the source rule

  • Revisit the weakest three topics from the error logs and write a corrected summary for each

  • Recite the licensing rules for category C, including age, health requirements, renewal and the consequences of losing the licence

  • Simulate exam-day pacing by answering 100 mixed questions within the time limit and keeping accuracy above the pass margin

Your checkpoint

Two scored mock tests with a final one-page revision sheet covering the three weakest topics

Milestones

Week 2: Score at least 80 percent on a 40-question mixed set drawn only from domains 1 and 2, with no repeated error type from week 1

Week 4: Explain the stopping-distance table and the 20-point pre-drive checklist from memory without notes, and score at least 80 percent on a 30-question set from domains 2 and 3

Week 6: Correctly solve 8 of 10 load and dimension calculations and write a legal daily tachograph timeline with no rule breaches

Week 8: Pass two full-length timed mock tests above the pass margin and show that every logged error from weeks 1 to 7 has a written correction