NRCA Modified Bitumen study materials
NRCA Modified Bitumen study resources

NRCA Modified Bitumen case studies

NRCA Modified Bitumen · Put your knowledge to work in context.

The NRCA Modified Bitumen credential is a knowledge assessment for roofing professionals who install or supervise modified bitumen membrane systems - APP and SBS sheets applied by torch, hot asphalt, cold adhesive, or self-adhered methods. It suits experienced installers seeking formal recognition, foremen, estimators, inspectors, and contractors who want documented competence in membrane work. The exam samples the full installation chain: material composition and manufacturing (polymer type, reinforcement, surfacing, granule embedment), deck and substrate readiness, base and ply sheet layout, the four application methods and their distinct heat, adhesion, and lap requirements, flashing and termination detailing at walls, curbs, drains, and penetrations, torch and kettle safety, and inspection, defect recognition, repair, and code compliance. Preparation works best in layers. The NRCA Modified Bitumen case studies are 5 cases and about 2,904 words.

1

Roll Goods Acceptance After Improper Site Storage

A contractor’s crew is scheduled to install 48 rolls of SBS-modified bitumen cap sheet on a 22,000 ft² roof. The pallets were delivered 10 days earlier and left uncovered at grade because the hoist was down.

651 words, about 3 min
2

Base Sheet Fastening and Wrinkles Before Cap Sheet

A 16,000 ft² roof over new construction has a 5/8 in. exterior-glue plywood deck spanning 24 in.

609 words, about 3 min
3

Self-Adhered Membrane Below Temperature Limit

An 8,000 ft² self-adhered SBS base sheet is being installed over new OSB sheathing in late October. Ambient temperature is 38°F and falling to 30°F overnight; deck surface temperature is 34°F in shade.

505 words, about 3 min
4

Parapet Wall Flashing Termination Without Counterflashing

During a roof replacement on a 30-year-old concrete-frame building, the crew is installing SBS-modified bitumen wall flashing at a concrete parapet. The new roof membrane termination is 8 in.

556 words, about 3 min
5

Torch Application at Combustible EIFS Parapet

A crew is torch-applying SBS cap sheet at the parapet of a 12-story building. The wall assembly includes combustible exterior insulation and finish system (EIFS) that terminates 10 in.

583 words, about 3 min