OK Fire Sprinkler case studies
OK Fire Sprinkler · Put your knowledge to work in context.
An Oklahoma fire sprinkler license is the state credential that allows a contractor to bid, install, and alter automatic sprinkler systems, and allows individual fitters to perform that work under a licensed contractor. Oklahoma regulates this trade at the state level rather than through municipal licensing alone, and the protective-health side of state government has historically administered it. The OK Fire Sprinkler case studies are 5 cases and about 3,014 words.
1Hydraulic Supply Shortfall on an Office-to-Storage Conversion
A 24,000 sq ft single-story office building is being converted to Class III storage with a 12 ft ceiling. The design is a wet-pipe system at 0.20 gpm/sq ft over 1,500 sq ft, plus a 250 gpm hose allowance.
676 words, about 3 min2Dry-Pipe Trip Test Failure in an Unheated Warehouse
An 18,000 sq ft unheated warehouse has a dry-pipe system protecting 2,600 sq ft of loading-dock storage and a canopy. The system has a 4-inch riser, 120 ft of 3-inch main, eight 1.25-inch branch lines with 24 pendent heads, and a compressor maintaining 35 psi air pressure.
591 words, about 3 min3Seismic Bracing Layout in a High-Seismic Data Hall
A new 12,000 sq ft single-story data hall is in Seismic Design Category D. The sprinkler main is 6-inch Schedule 40 steel, running 120 ft at a 12 ft ceiling, with 2-inch branch lines at 10 ft spacing.
588 words, about 3 min4Diesel Fire Pump and Suction Tank Sizing
A new 1,000 gpm diesel fire pump is rated at 60 psi with a churn pressure of 78 psi. It takes suction from a 90,000-gallon ground-level concrete tank through 15 ft of 8-inch suction pipe with two long-radius elbows and a vortex plate.
578 words, about 3 min5Final Acceptance Testing of a Wet System and Standpipe
A new 13 system in a six-story office building is ready for final acceptance. The hydrostatic test was conducted at 200 psi for two hours.
581 words, about 3 min