Carpentry NC II study guide
Carpentry NC II · Work through your exam, one topic at a time.
Carpentry NC II is a Philippine national certificate awarded under the Technical Education and Skills Development Authority (TESDA) qualification framework. It certifies that a holder can perform the core competencies of a construction carpenter at entry-to-journeyman level: setting out and laying out a job, installing and stripping formwork and shoring, doing rough framing, and completing finish carpentry and joinery to specification, while working safely and documenting work properly. The Carpentry NC II study guide has 10 sections and about 2,772 words.
01Workplace Communication and Documentation
Workplace communication and documentation tests whether you can receive, confirm, record, and hand over site information without losing meaning. Carpentry work fails quickly when a verbal instruction is not written down or when a form is filled from memory.
285 words, about 1 min02Occupational Health and Safety and Environmental Compliance
Occupational health and safety and environmental compliance tests hazard recognition, control selection, emergency response, and waste handling on a carpentry site. In the Philippines, RA 11058 and DOLE Department Order 198-18 set the framework for OSH, while RA 9003 guides solid waste segregation.
296 words, about 1 min03Tools, Equipment, and Materials Handling and Maintenance
Tools, equipment, and materials handling and maintenance tests whether you can select the right tool, inspect it, use it safely, store it, and keep lumber and sheet goods fit for purpose. Match the tool to the task and material: crosscut saw for crosscuts, rip saw for rips, correct bit for the fastener and substrate.
312 words, about 2 min04Interpretation of Drawings, Plans, and Specifications
Interpretation of drawings, plans, and specifications tests whether you can read a set as a coordinated system, not as separate sheets. You must find dimensions, levels, material calls, schedules, revisions, and notes, then resolve conflicts before construction.
278 words, about 1 min05Layout and Setting Out
Layout and setting out tests whether you can transfer dimensions from drawings to the ground or floor accurately, establish control, and verify square, level, and plumb before work proceeds. Establish a benchmark or datum and protect it; all levels and offsets should trace back to it.
287 words, about 1 min06Formwork and Shoring Installation and Removal
Formwork and shoring installation and removal tests safe erection, adequate bracing, correct dimensions, and controlled stripping. Formwork must hold fresh concrete without distortion, and shoring must carry construction loads safely.
275 words, about 1 min07Rough Framing and Structural Carpentry
Rough framing and structural carpentry tests whether you can assemble floors, walls, and roofs to line, level, plumb, and the specified nailing and bracing. Structural work must follow the drawings and code requirements, not shortcut conventions.
280 words, about 1 min08Finish Carpentry and Joinery
Finish carpentry and joinery tests the fit and appearance of doors, windows, trim, cabinets, stairs, and joints, plus the discipline needed to protect completed work. Check openings and substrates before installation; correct framing errors before fitting trim.
257 words, about 1 min09Quality Control and Work Completion
Quality control and work completion tests whether you can inspect against criteria, record results, correct nonconformities, and hand over work that is complete and protected. Know the acceptance criteria: dimensions, tolerances, alignment, finish, and function.
248 words, about 1 min10Professional and Ethical Conduct
Professional and ethical conduct tests whether you act with integrity, competence, safety awareness, and respect for people, property, and the environment. Technical skill does not excuse false records, unsafe shortcuts, or concealment.
254 words, about 1 min