Construction Painting NC II case studies
Construction Painting NC II · Put your knowledge to work in context.
Construction Painting NC II is a Philippine national competency credential for painters working on building and civil construction projects. It certifies that a holder can perform painting work to industry standard: applying safety and environmental practices on site, selecting and maintaining brushes, rollers, spray equipment and materials, preparing concrete, wood, metal and drywall surfaces, mixing and conditioning coatings, and applying paint by brush, roller and spray. The Construction Painting NC II case studies are 5 cases and about 3,151 words.
1Solvent Vapors in a Basement Storage Room
A three-person crew is repainting the ceiling and walls of a 4 m × 6 m basement storage room in a school with solvent-based gloss enamel over a sound primer. The only access is one door at the top of six steps.
668 words, about 3 min2Repainting a Chalking, Efflorescent Concrete House
A two-storey concrete house is being repainted. The existing coating is an 8-year-old gloss enamel.
655 words, about 3 min3Epoxy Floor Mix That Went Hot and Stringy
A 60 m² workshop floor is to receive a two-pack epoxy coating. The kit is 4 L, the stated pot life is 4 hours at 25 °C, and the data sheet requires a 15-minute induction period.
604 words, about 3 min4Lap Marks Where Two Roller Men Met
Two painters are coating a 12 m long, 5 m high corridor wall with a fast-drying acrylic semi-gloss latex in 'off-white'. Site temperature is 31 °C, humidity 55%, and an industrial fan is blowing along the wall to keep the men cool.
603 words, about 3 min5Touch-Up Paint From an Unlabeled Can
A 40-unit apartment turnover is in its final week. All unit walls were coated with a custom tint 'warm sand' in eggshell from a single 5-gallon batch, and the batch number was written on the painter's log.
621 words, about 3 min