EIM NC II study plan

Identify the input and output connectors on a lighting console, dimmer rack, and powered speaker, and state the signal each carries

Trace a complete signal path from source (console or mixer) through processing to output device, and explain where each cable type belongs

Compute a safe electrical load for a given fixture list by summing wattage, converting to amperes, and comparing against the circuit breaker rating

Demonstrate the safe coiling, labeling, and storage of XLR, DMX, and power cables in a simulated load-out

Address and patch a set of DMX fixtures so that each fixture responds only to its assigned channels and universe

Configure a basic audio mixer by setting gain structure, routing channels to mains, and confirming no clipping at each stage

Set up and align two powered speakers and one monitor for a small room, applying correct placement and gain-before-feedback practice

Sequence a power-up and power-down order that protects amplifiers and speakers from thumps

Diagnose five injected faults in a lighting or audio chain by isolating the failure stage using substitution and signal tracing

Perform preventive maintenance tasks on cables, connectors, fixtures, and mixer surfaces, and record each action taken

Create and organize a digital folder structure for event files, equipment logs, and maintenance records using standard naming conventions

Demonstrate safe file handling: save, back up to a second location, and restore a document without data loss

Conduct a hazard identification walkthrough of a mock venue and classify each finding by risk level

Apply the hierarchy of controls to at least three identified hazards and justify each chosen control

Demonstrate correct use of personal protective equipment and safe manual handling for a 25 kg speaker cabinet

Explain emergency response steps for electrical shock, fire, and rigging failure in an event setting

Interpret a work order or client brief and translate it into a checklist of measurable quality criteria

Perform a pre-event quality inspection of audio and lighting output against those criteria and record pass or fail for each

Draft and deliver a short verbal status update to a supervisor using a clear structure of situation, action, and next step

Complete an incident or non-conformance report in clear written English with no missing required fields

Role-play receiving and clarifying instructions, confirming understanding by restating the task back to the speaker

Respond to a simulated conflict within a crew by using neutral language and escalating appropriately

Identify each team member's role and reporting line in a mock event crew and describe how handoffs occur between them

Write a short professional email reporting a delay to a client or supervisor, including impact and proposed remedy

Map your current skills against the NC II competency requirements and list at least three specific gaps with an action for each

Draft a professional development plan with short-term and long-term career goals and the training each requires

Describe how to maintain professional conduct, punctuality, and appearance standards expected on an event crew

Apply continuous improvement by reviewing your week 5 inspection results and proposing two process changes

Complete a timed full-length practice assessment across all nine domains and score each domain separately

Re-teach the two weakest domains using your own notes and confirm understanding by explaining them aloud

Run an end-to-end mock event setup from brief to final quality check within a set time limit

Compile a one-page quick-reference sheet of formulas, connector types, and safety steps for final review