Certificate III in Roof Tiling study plan

Map every core unit of competency to its performance criteria and note which evidence each requires

Define the regulatory and standards framework that governs roof tiling work in your jurisdiction without looking at notes

List the personal protective equipment and site safety controls required before any roof access

Explain how the hierarchy of control applies to working at height on a tiled roof

Interpret roof plans, elevations and sections to extract pitch, span and set-out dimensions

Calculate rafter lengths, ridge heights and overhang allowances from given rise and run figures

Identify the structural members of a roof frame and state the load path from tile to footing

Convert between metric units and scale ratios on a drawing without error

Describe the correct sequence for setting out and laying a concrete tile roof from eaves to ridge

Select the right tile, batten and fixing type for a stated pitch and wind classification

Explain sarking, flashing and ventilation placement at eaves, valleys and ridges

Demonstrate the accepted method for cutting, holing and fastening tiles at hips and valleys

Apply the tolerances and inspection checkpoints used to accept a completed tile roof

Diagnose common defects such as cracked tiles, slipped courses and failed flashings and state the remedy

Identify the elective units available and select those matching your intended job role

Explain the difference between a repair, a re-roof and a new installation in scope and risk

Plan the safe handling, stacking and distribution of tiles on a roof without overloading the frame

Describe the preparation and application of tile bedding and pointing materials

Explain the purpose and correct installation of sarking, battens and ridge capping

State the environmental controls for waste disposal and stormwater protection on a tiling site

Compare the installation requirements of terracotta, concrete and metal roofing systems

Describe the process for replacing broken tiles and re-bedding ridge capping on an existing roof

Explain how roof plumbing interfaces with tiling at gutters, downpipes and penetrations

Outline the requirements for installing roof safety mesh and anchor points

Work through a full simulated job from plan reading through to final inspection sign-off

Prepare a materials take-off including tiles, battens, sarking and fixings with waste allowance

Write a short safe work method statement for a two-storey tiled roof installation

Answer practice questions across all units and log every incorrect answer with the correct reasoning

Revise every logged error from week seven until each can be explained without prompts

Recite the performance criteria of each core unit from memory in summary form

Complete a timed mock assessment under exam conditions and score it honestly

Identify any remaining weak unit and schedule targeted review before the exam date