FPAS Fire Systems Design (FSD) study materials
FPAS Fire Systems Design (FSD) study resources

FPAS Fire Systems Design (FSD) case studies

FPAS Fire Systems Design (FSD) · Put your knowledge to work in context.

The Fire Protection Accreditation Scheme (FPAS) is run by Fire Protection Association Australia (FPA Australia), and Fire Systems Design (FSD) is one of its accreditation streams. FPA Australia's website lists FSD under Accreditation & Licensing alongside Fire Systems Certification, Fire Safety Assessment, Inspect and Test, and Recognised Business, and it maintains a public Fire Systems Design register of accredited practitioners. The FPAS Fire Systems Design (FSD) case studies are 5 cases and about 4,022 words.

1

High-Ceiling Warehouse Nuisance Alarms and Detection Strategy

An 8,000 m² distribution warehouse has a 12 m high ceiling, 7 m high racking and a busy loading dock with diesel forklifts. The existing conventional fire panel has 24 zones, all used, and smoke detectors are mounted at ceiling level throughout the warehouse.

844 words, about 4 min
2

Warehouse Storage Height Increase and Existing Sprinkler Capacity

A single-storey warehouse, 120 m by 60 m, has a 9 m ceiling and an existing wet-pipe sprinkler system designed as Ordinary Hazard. Storage was originally 3.5 m high; the operator now wants 7 m high racking over half the floor and a 4 m high mezzanine office over the other half.

836 words, about 4 min
3

Hydrant Ring Main Pressure Shortfall and Booster Connection

An industrial estate is protected by a 200 mm ductile iron ring main fed by a diesel fire pump and a town main. Six hydrants and twelve hose reels are connected.

810 words, about 4 min
4

Clean-Agent Room Integrity Failure and Manual Door Reliance

A 180 m³ server room is protected by a clean-agent total flooding system using a synthetic halocarbon agent. The room has a raised floor, a suspended ceiling used as a return air plenum, two doorways with 20 mm undercuts, and numerous unsealed cable penetrations.

760 words, about 4 min
5

Mixed-Use Extinguisher Standardisation Proposal

A four-storey mixed-use building contains offices, a commercial kitchen with deep fryers, a main electrical switchroom, and a basement car park. The owner's maintenance contractor has proposed replacing all existing extinguishers with 4.5 kg ABE dry powder units, mounted at 1.5 m to the handle, one per 200 m², with no signage.

772 words, about 4 min