High Risk Work Licence - Forklift Truck (LF) study guide
High Risk Work Licence - Forklift Truck (LF) · Work through your exam, one topic at a time.
The Forklift Truck (LF) licence is a Australian high risk work licence that authorises you to operate a forklift in the workplace. It is issued under work health and safety legislation and is typically valid for five years, after which it must be renewed. The High Risk Work Licence - Forklift Truck (LF) study guide has 9 sections and about 2,808 words.
01Work Health and Safety Legislation, Duties and Licence Obligations
Forklift operation is governed by work health and safety (WHS) legislation, which imposes a primary duty of care on persons conducting a business or undertaking (PCBU) to ensure health and safety so far as reasonably practicable. Workers also have duties to take reasonable care, comply with instructions, and not adversely affect others.
400 words, about 2 min02Hazard Identification, Risk Assessment and Control
Hazard identification is the first step in managing risks. A hazard is anything with potential to cause harm; risk is the likelihood and consequence of that harm.
322 words, about 2 min03Forklift Types, Components, Stability and Load Charts
Forklifts come in many configurations: counterbalance (electric, diesel, LPG), reach trucks, order pickers, pallet jacks, and telehandlers. Key components include the mast, carriage, forks, overhead guard, backrest extension, counterweight, and data plate.
354 words, about 2 min04Pre-operational Checks, Inspection and Maintenance Reporting
Pre-operational checks are conducted before each shift to ensure the forklift is safe to operate. They are not a substitute for regular maintenance but are a critical risk control.
282 words, about 1 min05Load Assessment, Weight Estimation and Safe Load Handling
Before lifting, assess the load: weight, shape, stability, and load centre. Weight may be marked on the load or packaging; if unknown, estimate or use a scale.
298 words, about 1 min06Operational Techniques: Travelling, Manoeuvring and Load Placement
Operate at a safe speed, especially in congested areas, near pedestrians, and on uneven ground. Travel with the load low and mast tilted back.
290 words, about 1 min07Site Traffic Management, Pedestrians and Communication
Site traffic management aims to separate pedestrians and plant. This is achieved through designated walkways, barriers, signage, and traffic flow plans.
279 words, about 1 min08Emergency Procedures, Incident Response and Shutdown
Know the site emergency procedures: evacuation routes, assembly points, and emergency contacts. In case of a forklift tip-over, do not jump; stay in the seat, brace yourself, and hold on.
316 words, about 2 min09Practical Operation and Post-Operational Procedures
Practical operation integrates all previous domains. You must demonstrate competent control of the forklift: pre-start checks, load assessment, safe travelling, manoeuvring, load placement, and shutdown.
267 words, about 1 min