I85PREP
⌘ K
Bermuda Four-Wheel Vehicle Written Test study materials
Bermuda Four-Wheel Vehicle Written Test study resources

Bermuda Four-Wheel Vehicle Written Test practice questions

One question at a time. Build your Bermuda Four-Wheel Vehicle Written Test understanding.

First 50 of 200 questions. Each one lists the choices, the correct answer, and an explanation. The checker at the top of this page saves progress in this browser when it is available.

Continue in the practice tool above to load more questions, 50 at a time.

Question 1Traffic Signs, Signals, and Road Markings

What does a red octagonal sign mean when you encounter it on a Bermuda road?

  1. Yield to traffic on the right
  2. Come to a complete stop Correct answer.
  3. Reduce speed and proceed
  4. No entry for all vehicles

Explanation

The octagon is reserved exclusively for STOP signs, and its unique shape lets drivers identify it even when the face is obscured. A full stop is required before the marked line or intersection, followed by a check that the way is clear.

Question 2Traffic Signs, Signals, and Road Markings

A triangular sign with a red border and a white interior generally warns a driver of what?

  1. A parking area for permit holders
  2. The end of a restricted zone
  3. A hazard or regulation ahead Correct answer.
  4. A mandatory minimum speed

Explanation

Triangular signs with a red border are warning signs, alerting drivers to a hazard or a rule that applies ahead. Recognizing the shape lets you anticipate the need to slow or prepare to act before you reach the feature itself.

Question 3Traffic Signs, Signals, and Road Markings

What is the meaning of a circular sign with a red border and a white centre showing a black numeral?

  1. A maximum speed limit Correct answer.
  2. The distance to the next town
  3. A recommended cruising speed
  4. A minimum speed requirement

Explanation

A red-bordered circle is a prohibitory sign, and a numeral inside it states the maximum lawful speed in the units used locally. Exceeding that figure is an offence regardless of traffic conditions, though slower speeds may still be required.

Question 4Traffic Signs, Signals, and Road Markings

What must a rider or driver do when a traffic light shows a steady amber (yellow) signal?

  1. Continue at the same speed always
  2. Accelerate to clear the junction
  3. Reverse out of the junction
  4. Stop unless it is unsafe to do so Correct answer.

Explanation

A steady amber means the signal is about to turn red, so you must stop unless you are so close that stopping would itself be dangerous. Treating amber as a warning to stop, rather than a signal to hurry, prevents collisions at the stop line.

Question 5Traffic Signs, Signals, and Road Markings

A sign shows a white bicycle symbol on a blue circular background. What does this require?

  1. A bicycle parking zone
  2. Cyclists must give way
  3. A route reserved for cyclists Correct answer.
  4. Cyclists are prohibited

Explanation

Blue circular signs give mandatory instructions, and a bicycle symbol indicates a route or lane that is reserved for cyclists. Other vehicles must not use that facility unless a supplementary plate says otherwise.

Question 6Traffic Signs, Signals, and Road Markings

What does a broken white line along the centre of a two-way road normally indicate?

  1. Parking is allowed on the line
  2. Overtaking is permitted when safe Correct answer.
  3. Overtaking is prohibited
  4. A bus-only lane begins

Explanation

A broken centre line separates opposing streams and may be crossed to overtake or turn when it is safe and visibility allows. It is permissive, not compulsory, so drivers must still judge whether a manoeuvre can be completed safely.

Question 7Traffic Signs, Signals, and Road Markings

How should you respond to a flashing red light at a level crossing or junction?

  1. Proceed without checking
  2. Stop, then proceed when clear Correct answer.
  3. Speed up to cross quickly
  4. Sound the horn and continue

Explanation

A flashing red signal has the same force as a stop sign: you must come to a halt and may only continue once the way is clear and it is safe. Flashing red does not grant priority over other traffic.

Question 8Traffic Signs, Signals, and Road Markings

What information does a rectangular green sign with white lettering typically provide on a Bermuda road?

  1. A prohibition on entry
  2. A compulsory speed limit
  3. A warning of sharp bends
  4. Direction and distance to places Correct answer.

Explanation

Green rectangular signs are direction signs, guiding drivers toward destinations and giving distances or route numbers. They inform rather than order, so they do not by themselves impose a speed or a restriction.

Question 9Traffic Signs, Signals, and Road Markings

You approach an intersection where the traffic lights are dark because of a power failure. What is the safest lawful action?

  1. Treat it as an uncontrolled junction and give way as required Correct answer.
  2. Wait until the lights are repaired before moving
  3. Proceed through at normal speed with priority
  4. Follow the vehicle in front without checking

Explanation

When signals are not working, the junction reverts to the ordinary right-of-way rules, so you must approach with caution and give way as you would at an uncontrolled intersection. Assuming priority because a light was green earlier is unsafe.

Question 10Traffic Signs, Signals, and Road Markings

A double white line has a continuous line on your side and a broken line on the other. What does this mean for you?

  1. Only lorries may cross the lines
  2. The lines mark a parking bay
  3. You must not cross or straddle the lines Correct answer.
  4. You may cross to overtake freely

Explanation

Where the solid line is nearest to you, crossing or straddling the pair is prohibited; the broken line on the far side permits traffic coming the other way to cross when safe. The restriction applies to your direction of travel only.

Question 11Traffic Signs, Signals, and Road Markings

A driver sees a sign bearing a red circle with a white horizontal bar. What does it prohibit?

  1. Turning right at the junction
  2. Waiting for longer than one hour
  3. Entry by vehicles in that direction Correct answer.
  4. Use of the road by pedestrians

Explanation

The red circle with a white bar is the no-entry sign, meaning vehicles must not proceed past it in the direction shown. It is typically placed at the exit of a one-way street or a restricted access point.

Question 12Traffic Signs, Signals, and Road Markings

What is the purpose of a yellow box junction marked with criss-cross lines on the road surface?

  1. To keep the area clear of stationary vehicles Correct answer.
  2. To reserve space for loading goods
  3. To indicate a change in speed limit
  4. To mark a pedestrian crossing point

Explanation

A box junction is designed to prevent gridlock: you may enter only if your exit is clear, apart from when waiting to turn right and blocked by oncoming traffic. Stopping inside the box otherwise obstructs crossing traffic and is an offence.

Question 13Traffic Signs, Signals, and Road Markings

A signal shows a green arrow pointing left while the main aspect is red. What may you do?

  1. Wait until the main light turns green
  2. Proceed only in the direction of the arrow Correct answer.
  3. Proceed straight ahead as well
  4. Reverse to change lanes

Explanation

A green arrow authorises movement only in the direction it indicates, even if the main aspect is red, provided the way is clear. Traffic going straight or to the right must still obey the red main light.

Question 14Traffic Signs, Signals, and Road Markings

What does a circular blue sign showing a white arrow pointing straight up require of drivers?

  1. Proceed ahead only Correct answer.
  2. Turn right ahead
  3. Stop before the sign
  4. Give way to oncoming traffic

Explanation

Blue circles are mandatory signs, and a straight arrow directs traffic to continue ahead only. Turning from that lane would conflict with the order the sign gives.

Question 15Traffic Signs, Signals, and Road Markings

You are driving and see a sign showing a red triangle with a symbol of children. How should you respond?

  1. Stop immediately and wait for a guide
  2. Slow down and watch for children near the road Correct answer.
  3. Maintain speed because the sign is advisory only
  4. Sound the horn continuously

Explanation

Warning signs alert you to a hazard ahead, and a children symbol indicates a school or play area where young people may enter the road unpredictably. The correct response is to reduce speed and be ready to stop, not to halt on the spot.

Question 16Traffic Signs, Signals, and Road Markings

A solid white line marks the edge of the carriageway on a narrow Bermuda road. What is its main function?

  1. To mark a school zone boundary
  2. To reserve the edge for parking
  3. To permit overtaking anywhere
  4. To show the limit of the roadway Correct answer.

Explanation

Edge lines define the drivable width of the carriageway, helping drivers keep their position, especially in poor light or rain. They are guidance markings rather than an invitation to overtake or park.

Question 17Traffic Signs, Signals, and Road Markings

What does a flashing amber light at a pedestrian crossing require a driver to do?

  1. Give way to pedestrians on the crossing Correct answer.
  2. Proceed because pedestrians must wait
  3. Reverse away from the crossing
  4. Stop and wait for a green light

Explanation

A flashing amber at a pedestrian crossing means vehicles must yield to anyone already on the crossing, but may proceed if it is clear. It differs from a steady red, which requires a complete stop regardless.

Question 18Traffic Signs, Signals, and Road Markings

A driver passes a sign showing a red circle containing a black car and a black motorcycle side by side. What does it mean?

  1. Cars must carry passengers
  2. A garage is ahead
  3. Motor vehicles are prohibited Correct answer.
  4. Motorcycles only may proceed

Explanation

A red-bordered circle is prohibitory, and the vehicle symbols inside indicate that the classes shown are banned from the route ahead. The sign restricts access rather than directing drivers to a facility.

Question 19Traffic Signs, Signals, and Road Markings

You are waiting at a junction and the light turns green, but the exit beyond the junction is blocked by stationary traffic. What should you do?

  1. Edge forward past the stop line
  2. Use the opposite lane to get around
  3. Stay behind the stop line until the exit clears Correct answer.
  4. Enter the junction and wait in the middle

Explanation

A green light permits movement but does not guarantee space on the far side; entering when the exit is blocked can leave you stranded across the junction. Waiting behind the line until there is room keeps the crossing clear for other traffic.

Question 20Traffic Signs, Signals, and Road Markings

What distinguishes a warning sign from an information sign in terms of the action expected from a driver?

  1. Warning signs call for anticipation; information signs guide without ordering Correct answer.
  2. Both require an immediate stop in all cases
  3. Information signs require a stop; warning signs only advise
  4. Warning signs impose legal penalties; information signs never do

Explanation

Warning signs tell you a hazard is ahead so you can adjust speed and position in advance, while information signs supply directions or facilities and impose no direct obligation. Understanding the distinction helps a driver decide when action, rather than mere awareness, is needed.

Question 21Traffic Signs, Signals, and Road Markings

A road has a broken white line on your side and a solid white line on the opposite side of a two-way carriageway. What does this arrangement permit?

  1. Only the opposing traffic may cross
  2. Neither direction may cross the lines
  3. You may cross to overtake when it is safe Correct answer.
  4. Both directions may cross freely

Explanation

When the broken line is nearest to you, you may cross the centre markings to overtake or turn provided the manoeuvre is safe. Traffic on the other side faces the solid line and is prohibited from crossing.

Question 22Traffic Signs, Signals, and Road Markings

At a junction controlled by signals, a green filter arrow goes out while the main light remains red. What is the correct interpretation?

  1. The arrowed movement remains lawful until the main light changes
  2. The junction has become uncontrolled
  3. The arrowed movement is no longer protected and you must wait Correct answer.
  4. You may proceed in any direction

Explanation

A filter arrow authorises movement only while it is illuminated; once it extinguishes, that permission ends even though other aspects may not have changed. The main red light then governs, so a driver must wait rather than assume continued priority.

Question 23Traffic Signs, Signals, and Road Markings

A driver sees a sign showing a red circle with a diagonal bar across a U-shaped arrow. What is the effect of this sign?

  1. U-turns are permitted for cars only
  2. Only buses may make U-turns
  3. U-turns are prohibited at that point Correct answer.
  4. U-turns are compulsory

Explanation

A red circle with a diagonal bar cancels the movement depicted inside it, so a barred U-turn arrow bans U-turns. Drivers must continue to a point where a lawful turn can be made instead.

Question 24Traffic Signs, Signals, and Road Markings

Why do stop signs use a unique octagonal shape in addition to their colour and wording?

  1. To make the sign cheaper to manufacture
  2. To indicate the number of approach lanes
  3. So the sign can be recognized by shape alone in poor conditions Correct answer.
  4. To distinguish it from speed limit signs of the same colour

Explanation

Shape coding allows drivers to identify a stop sign even when snow, dirt, glare, or the rear of the sign obscures its face. Because the octagon is used for no other purpose, the silhouette alone carries the instruction to stop.

Question 25Traffic Signs, Signals, and Road Markings

A driver approaches a pedestrian crossing where the signal shows a steady green figure for pedestrians and a red light for vehicles. What is the correct action?

  1. Remain stopped until the crossing is clear and your signal permits Correct answer.
  2. Creep forward while pedestrians are still crossing
  3. Move off as soon as the pedestrian reaches the far kerb
  4. Sound the horn to hurry pedestrians along

Explanation

While pedestrians have a green figure, vehicles face a red light and must stay stopped, even if the crossing appears to empty momentarily. Moving before your own signal permits risks a collision with a slower pedestrian still on the crossing.

Question 26Traffic Signs, Signals, and Road Markings

What is the primary purpose of a stop line painted across your lane at a junction?

  1. To mark where vehicles must halt before entering the junction Correct answer.
  2. To indicate the edge of a bus stop area
  3. To show where parking is permitted along the kerb
  4. To warn of a speed hump ahead

Explanation

A stop line is a solid white line across the lane that shows the exact point where a driver must stop when required by a stop sign, traffic signal, or pedestrian crossing. Stopping beyond it can obstruct crossing pedestrians or encroach on the junction.

Question 27Traffic Signs, Signals, and Road Markings

A driver sees a circular sign with a red border and a white background showing a black number '30'. What does this sign mean?

  1. The maximum speed permitted is 30 km/h Correct answer.
  2. The minimum speed you must maintain is 30 km/h
  3. The distance to the next town is 30 km
  4. The road is 30 metres wide ahead

Explanation

A red-bordered circle with a number is a regulatory speed limit sign. It sets the maximum legal speed in kilometres per hour for the road ahead until another limit is posted.

Question 28Traffic Signs, Signals, and Road Markings

What does a broken yellow line along the edge of the carriageway normally indicate?

  1. The road is a one-way street
  2. Waiting restrictions apply at certain times Correct answer.
  3. A loading bay for goods vehicles
  4. Parking is allowed at all times

Explanation

A broken yellow line at the kerb indicates that waiting or parking is restricted during the times shown on nearby plates. Outside those times, normal parking rules apply. A continuous yellow line means no waiting at any time.

Question 29Traffic Signs, Signals, and Road Markings

At a junction, you see a sign showing a red triangle with a symbol of a car skidding. What action should you take?

  1. Move to the centre of the road for a better view
  2. Increase speed to clear the hazard quickly
  3. Sound your horn to warn other drivers
  4. Reduce speed and avoid sudden braking or steering Correct answer.

Explanation

A red triangle warning sign with a skidding car warns of a slippery road surface ahead. The correct response is to slow down smoothly and avoid abrupt braking, acceleration, or steering that could cause a skid.

Question 30Traffic Signs, Signals, and Road Markings

What is the meaning of a traffic light showing a steady amber aspect alone?

  1. Give way to traffic from the right
  2. The signals are out of order
  3. Stop unless it is unsafe to do so Correct answer.
  4. Proceed if the junction is clear

Explanation

A steady amber light means stop, unless you are so close to the stop line that stopping safely is not possible. It warns that red will follow immediately.

Question 31Traffic Signs, Signals, and Road Markings

A driver approaches a junction where the traffic lights show a red light and a green right-turn arrow. What may the driver lawfully do?

  1. Proceed straight ahead after giving way
  2. Turn left immediately without checking
  3. Turn right, but only after giving way to pedestrians and other traffic Correct answer.
  4. Reverse to the previous junction

Explanation

A green arrow permits movement only in the direction shown, provided the way is clear. The red main aspect still prohibits other movements, so the driver may turn right but must yield to pedestrians and conflicting traffic.

Question 32Traffic Signs, Signals, and Road Markings

What does a rectangular blue sign with a white 'P' and a white arrow pointing left indicate?

  1. A parking area is located to the left Correct answer.
  2. Parking is prohibited to the left
  3. A police station is to the left
  4. A pedestrian zone begins to the left

Explanation

A blue rectangular sign with a white 'P' is an information sign for parking. The arrow shows the direction to the parking facility, which is to the left in this case.

Question 33Traffic Signs, Signals, and Road Markings

You are driving and see a sign showing a red circle with a blue background and a red diagonal bar across a symbol of a bicycle. What does it mean?

  1. No cycling is permitted beyond the sign Correct answer.
  2. Cyclists have priority at the next junction
  3. A cycle lane begins ahead
  4. Cyclists must use the footway

Explanation

A red circle with a diagonal bar is a prohibition sign. When it contains a bicycle symbol, it means cycling is prohibited on the road or path beyond the sign.

Question 34Traffic Signs, Signals, and Road Markings

What is the purpose of a hatched area bounded by solid white lines in the centre of a road?

  1. To provide a lane for overtaking slower vehicles
  2. To separate opposing traffic and discourage driving on the marked area Correct answer.
  3. To indicate a pedestrian crossing point
  4. To mark a place where vehicles may park temporarily

Explanation

A hatched area with solid white boundaries separates traffic streams and keeps vehicles away from a hazard or from opposing lanes. Drivers should not enter it except in an emergency.

Question 35Traffic Signs, Signals, and Road Markings

A driver sees a warning sign showing a red triangle with a symbol of a bridge over water. What does this sign warn of?

  1. A narrow bridge or road narrowing ahead Correct answer.
  2. A river crossing where vehicles may be washed away
  3. A tunnel with poor ventilation
  4. A ferry terminal ahead

Explanation

A red triangle with a bridge symbol warns that the road narrows at a bridge ahead. Drivers should slow down and be prepared for restricted width or oncoming traffic.

Question 36Traffic Signs, Signals, and Road Markings

At a signal-controlled junction, the lights change to green but the exit beyond the junction is blocked by stationary traffic. What is the correct action?

  1. Stay behind the stop line until the exit is clear Correct answer.
  2. Enter the junction and wait across it
  3. Sound your horn until the traffic moves
  4. Drive onto the pavement to pass the blockage

Explanation

A green light does not authorise entering a junction if your exit is blocked. Waiting behind the stop line prevents blocking the junction and allows cross traffic to flow when its signal changes.

Question 37Traffic Signs, Signals, and Road Markings

What does a sign showing a red circle with a white horizontal bar on a blue background mean when placed above a lane?

  1. The lane is closed to all traffic Correct answer.
  2. The lane is reserved for buses
  3. The lane is for overtaking only
  4. The lane leads to a toll booth

Explanation

A red circle with a white horizontal bar is a 'no entry' symbol. When displayed above a lane, it means that lane is closed and drivers must not use it.

Question 38Traffic Signs, Signals, and Road Markings

A driver approaches a pedestrian crossing where the signal shows a flashing amber light and a green figure for pedestrians. What must the driver do?

  1. Sound the horn to warn pedestrians
  2. Reverse away from the crossing
  3. Stop and wait until the green figure goes out
  4. Proceed only if no pedestrians are on the crossing Correct answer.

Explanation

A flashing amber light at a pedestrian crossing means drivers must give way to pedestrians on the crossing. If the crossing is clear, the driver may proceed carefully.

Question 39Traffic Signs, Signals, and Road Markings

What is the key difference between a broken white line and a solid white line along the centre of a two-way road?

  1. A broken line prohibits crossing; a solid line permits crossing when safe
  2. A broken line marks a bus lane; a solid line marks a cycle lane
  3. Both lines have identical legal meaning
  4. A broken line permits crossing when safe; a solid line prohibits crossing Correct answer.

Explanation

A broken white centre line may be crossed when it is safe to do so, for example when overtaking. A solid white centre line must not be crossed except in limited circumstances such as passing a stationary obstruction.

Question 40Traffic Signs, Signals, and Road Markings

Why are warning signs generally triangular while regulatory signs are circular?

  1. To comply with international parking rules
  2. To indicate that the sign applies only to heavy vehicles
  3. To allow drivers to recognise the sign type quickly from a distance Correct answer.
  4. To make them cheaper to manufacture

Explanation

Shape and colour are used as a coding system so drivers can identify the general meaning of a sign at a glance before reading its symbol. Triangles warn of hazards, while circles impose rules or prohibitions.

Question 41Rules of the Road and Right-of-Way

On a two-lane road in Bermuda, traffic travels on which side of the road?

  1. On the right side
  2. On the left side Correct answer.
  3. On either side, as signed
  4. In the centre of the road

Explanation

Bermuda requires all vehicles to keep to the left side of the road, a rule inherited from British practice and applied consistently across the island's public roads. Drivers must position themselves left of the centre line and yield space accordingly.

Question 42Rules of the Road and Right-of-Way

What does a solid white line painted along the left edge of your lane generally mark?

  1. A loading zone for goods vehicles
  2. The centre of the road
  3. The edge of the carriageway Correct answer.
  4. A place reserved for overtaking

Explanation

A continuous white edge line defines the outer limit of the drivable carriageway, helping drivers judge lane position especially at night or in rain. Crossing it is discouraged except in an emergency or to enter a designated area.

Question 43Rules of the Road and Right-of-Way

You approach an unmarked crossroads with no signs and no signals. Which vehicle has priority?

  1. The vehicle approaching from your left
  2. Whichever vehicle is travelling faster
  3. The vehicle approaching from your right Correct answer.
  4. The larger of the two vehicles

Explanation

At an uncontrolled junction the general rule is to give way to traffic approaching from your right. If you intend to turn across the path of such a vehicle, you must wait until it has passed before completing the manoeuvre.

Question 44Rules of the Road and Right-of-Way

At a roundabout in Bermuda, which traffic has priority?

  1. Traffic entering from the left
  2. The first vehicle to sound its horn
  3. Traffic already circulating on the roundabout Correct answer.
  4. Traffic entering from the widest approach road

Explanation

Drivers entering a roundabout must give way to vehicles already on the circulatory carriageway, which approach from the right under keep-left traffic flow. Wait for a safe gap before joining, and signal your intended exit.

Question 45Rules of the Road and Right-of-Way

A pedestrian is waiting to cross at a marked pedestrian crossing. What must you do?

  1. Slow down and be prepared to stop to let them cross Correct answer.
  2. Flash your headlights and drive on
  3. Continue at the same speed if you are close
  4. Sound your horn to warn them to wait

Explanation

Drivers must approach pedestrian crossings at a speed that allows them to stop, and must give way to a pedestrian who is on or about to use the crossing. Failing to yield is a serious offence because pedestrians are unprotected.

Question 46Rules of the Road and Right-of-Way

You are turning left into a side road. A pedestrian is already crossing that side road. Who has priority?

  1. The pedestrian Correct answer.
  2. Your vehicle, if you signal in advance
  3. Your vehicle, because you are on the main road
  4. Whichever arrives first

Explanation

A driver turning into a side road must give way to pedestrians already crossing that road. The turn does not grant priority, and the pedestrian's position in the roadway must be respected.

Question 47Rules of the Road and Right-of-Way

An emergency vehicle approaches from behind with blue lights and siren operating. What should you do?

  1. Pull over safely and let it pass Correct answer.
  2. Speed up to stay ahead of it
  3. Move into the opposite lane to clear the way
  4. Stop immediately where you are

Explanation

You should give way to an emergency vehicle on an urgent call by moving as far left as is safe and stopping if necessary to let it pass. Do not brake abruptly or cross into oncoming traffic, as that creates a new hazard.

Question 48Rules of the Road and Right-of-Way

What is the purpose of a yellow box junction marked on the road?

  1. To mark a permitted U-turn area
  2. To indicate a change in the speed limit
  3. To reserve space for buses only
  4. To keep the area clear of stationary vehicles Correct answer.

Explanation

A yellow box marks an area that must be kept clear so that crossing traffic is not blocked. You may enter only if your exit is clear, apart from when waiting to turn right and only oncoming traffic prevents you.

Question 49Rules of the Road and Right-of-Way

You are driving and a school bus ahead has stopped with its red lights flashing. What is required?

  1. Slow down and pass with caution
  2. Stop and remain stopped until the lights stop flashing Correct answer.
  3. Pass only if no children are visible
  4. Sound your horn and continue

Explanation

When a school bus displays flashing red lights, traffic must stop and stay stopped until the lights are switched off, because children may be crossing the road. Passing a stopped school bus with its red lights on is a serious offence.

Question 50Rules of the Road and Right-of-Way

On a road with a broken white centre line, when may you cross it to overtake?

  1. Only when the vehicle ahead signals you through
  2. Never, under any circumstances
  3. Only if you exceed the speed limit briefly
  4. When it is safe and the road ahead is clear Correct answer.

Explanation

A broken centre line may be crossed to overtake provided you have a clear view, sufficient space and no oncoming traffic. You must complete the manoeuvre and return to the left before the line becomes solid.