Registered Electrical Engineer (G&T) study guide
Registered Electrical Engineer (G&T) · Work through your exam, one topic at a time.
The Registered Electrical Engineer (Generation and Transmission) credential - commonly written as Registered Electrical Engineer (G&T) - is a competent-person registration associated with Suruhanjaya Tenaga, the Malaysian Energy Commission. It is aimed at professional electrical engineers who take responsibility for the design, operation, and safety of generation and transmission infrastructure, as distinct from engineers working solely on consumer installations. Candidates are typically practising engineers seeking formal registration to sign off on, supervise, or advise on high-voltage generation and grid-connected transmission work. The assessment is expected to span four broad areas: generation and transmission practice; power system design and analysis; installation safety and regulatory compliance; and engineering management, ethics, and professional practice. The Registered Electrical Engineer (G&T) study guide has 4 sections and about 1,897 words.
01Generation and Transmission Electrical Engineering Practice
The Generation and Transmission Electrical Engineering Practice domain tests how well you can operate, plan, and troubleshoot the high-voltage bulk-power path from generator terminals to the transmission grid. Expect generator capability, grid-code obligations, transmission-line models, substation equipment, protection, and contingency analysis.
359 words, about 2 min02Electrical Power System Design and Analysis
The Electrical Power System Design and Analysis domain tests whether you can build a consistent model and use it to predict normal and abnormal performance. It covers per-unit bases, load flow, short-circuit and symmetrical components, transformer connections, protection coordination, motor starting, harmonics, and voltage-drop calculations.
368 words, about 2 min03Electrical Installation Safety and Regulatory Compliance
The Electrical Installation Safety and Regulatory Compliance domain tests the legal and practical controls that make an electrical installation safe and acceptable. It draws on the Philippine Electrical Code (PEC), RA 7920, local permitting and inspection, grounding and bonding, overcurrent protection, working clearances, hazardous-location rules, and safe work practices.
377 words, about 2 min04Engineering Management
The Engineering Management domain tests the non-technical controls that determine whether an electrical project is delivered safely, on scope, and within budget. Expect project planning, scheduling, cost control, procurement, contracts, quality, risk, and commissioning.
793 words, about 4 min