Canary Islands PAU Technical Drawing II exam-day guide
Canary Islands PAU Technical Drawing II · Prepare for the day ahead.
Your checklist
Official ID document
Bring the identity document (DNI, passport, or equivalent) that matches your exam registration. The exact accepted documents and whether a photocopy is valid must be confirmed with the convocatoria/provider; treat any specific document list as needs_review until you verify it in the official call.
Exam admission/registration proof
Carry the printout or digital proof of your registration and assigned venue/session if the provider issues one. Confirm with the provider whether a printed copy is mandatory or a digital version is accepted.
Approved drawing instruments
Bring a compass, set squares (30-60 and 45), ruler/scale, protractor, sharp pencils (HB/2H), eraser, and sharpener. Confirm with the provider whether any instrument type is restricted; this is needs_review because rules vary by year.
Ink/technical pens if permitted
Some technical drawing tasks may require inking or clean line work. Confirm with the provider whether ink pens are allowed or required, and which line thicknesses are expected, before relying on them.
Calculator and backup
Bring a permitted calculator and spare batteries. Confirm with the provider the exact calculator model restrictions, since graphing/programmable models are often limited; treat the permitted list as needs_review.
Spare drawing materials
Extra pencils, leads, eraser, and a spare compass lead reduce the risk of a mid-exam failure. Keep them in a clear container if the venue restricts loose items.
Analog watch
A simple non-smart watch helps you pace the drawing tasks if the room clock is not visible. Confirm with the provider whether watches are allowed in the room.
Clear pencil case or pouch
Many venues require transparent storage for materials. Confirm the provider's policy on bags and cases; mark as needs_review if the call does not state it.
Water and small snack for before/after
Stay hydrated and eat lightly before the session. Confirm with the provider whether items may be brought into the room, as food and drink rules vary.
Review the official instructions and scoring rubric
Re-read the convocatoria for the exact structure, time limit, and scoring of Technical Drawing II. Do not rely on second-hand summaries; confirm weighting and optionality with the provider.
Plan the route and arrive early
Check the venue location and transport in advance; arrive with buffer time. The required arrival margin is set by the provider, so confirm the exact time rather than assuming.
Rest and rehearse the tool setup
The night before, lay out instruments and practice a quick compass/set-square setup so the first minutes of the exam are not spent fumbling.
Plan the day
Review the official call and confirm room, time, ID rules, and permitted instruments with the provider. Do two timed practice drawings covering the main task types (dihedral/orthographic projection, sections, dimensioning, tangencies, and any perspective or CAD-style conventions in the syllabus). Audit your instrument kit for missing leads or a stiff compass.
Stop learning new content. Do one light timed sketch to keep your hand warm, then pack the checklist items into a clear case. Confirm transport and set two alarms. Sleep early; fatigue costs more marks in precision drawing than one extra exercise gains.
Eat a normal breakfast, re-check ID and registration proof, and leave with buffer time. On arrival, locate the room and seating, keep materials organized, and avoid last-minute cramming that raises anxiety. Follow the invigilator's instructions on when materials may be placed on the desk.
Read all instructions and the full paper before drawing. Note the time limit and mark which tasks are compulsory versus optional. Allocate time proportionally to marks and reserve 10-15 minutes for checking line quality, labels, and dimensions.
Set up the sheet and title block as required, draw construction/auxiliary lines lightly, and darken final lines only after geometry is confirmed. Dimension consistently, label views, and keep the drawing clean. If a construction goes wrong, erase fully rather than drawing over it. Watch the clock at each task boundary and move on when the allocated time is spent.
Check that every required view, section, and dimension is present, that line types are correct (visible, hidden, center, cutting-plane), and that your name/ID is where the provider requires. Hand in according to the invigilator's instructions.
Rules to check
Bring the ID document that matches your registration; the accepted document types and whether copies are valid must be confirmed with the provider.
Follow the provider's rules on permitted instruments, calculators, and electronic devices. Do not bring smart watches or phones into the drawing area unless explicitly allowed; confirm the device policy with the provider.
Arrive by the time stated in the official call. Late-entry and extra-time policies are set by the provider, so confirm them rather than assuming a grace period.
Breaks, water, and leaving the room during the session are governed by the invigilator and provider rules; ask before the exam starts if you need an accommodation.
Do not communicate with other candidates or share materials during the test. Any suspected misconduct is handled under the provider's regulations.
Scoring and weighting of Technical Drawing II tasks are defined in the official convocatoria; confirm the rubric and any penalties for missing views or dimensions with the provider before the exam.
Request any accessibility accommodation well in advance through the provider's official channel; do not assume it will be granted on exam day.
Keep your workspace and drawing clean and clearly labeled as instructed; unlabeled or ambiguous answers may not receive full credit under the provider's marking criteria.