ICC S1 Structural Steel and Bolting study guide
ICC S1 Structural Steel and Bolting · Work through your exam, one topic at a time.
The ICC Structural Steel and Bolting (S1) certification is a specialty credential for inspectors and plans examiners who evaluate structural steel construction. It sits alongside the general building and framing certifications and signals that a candidate can check steel work against the adopted code, the approved construction documents, and the referenced standards that govern fabrication, bolting, welding, and erection. The ICC S1 Structural Steel and Bolting study guide has 7 sections and about 3,367 words.
01Code Administration, Plans and Specification Review for Structural Steel
An inspector works inside a legal hierarchy, and questions on this domain test whether you know who owns which decision. The building code (IBC Chapter 17 and its referenced standards) sets the minimum; AISC 360 (the Specification), AISC 303 (the Code of Standard Practice), the RCSC Specification for Structural Joints Using High-Strength Bolts, and AWS D1.1 supply the technical rules; and the contract documents may be stricter than the code but never looser.
657 words, about 3 min02Bolted Connections: Bolts, Washers, Installation and Tensioning
Candidates must recognize the common ASTM designations and what each buys you. A36 is the baseline carbon steel (Fy = 36 ksi).
659 words, about 3 min03Fabrication and Component Verification
Shop work converts approved shop drawings into marked, fitted, and finished pieces. The inspector verifies, not supervises: piece dimensions against the drawing, member marks, camber, hole size and location, weld size and length against the symbols, cut quality, and coating or galvanizing.
315 words, about 2 min04Welded Connections: Processes, Qualification, and Weld Inspection
Welding questions center on AWS D1.1 and AISC 360 Chapter N. Know the common processes: SMAW (shielded metal arc, stick), GMAW (gas metal arc, short-circuit or spray), FCAW (flux cored), SAW (submerged arc), and the electroslag/electrogas processes for vertical groove welds.
323 words, about 2 min05Structural Steel Erection, Framing, and Alignment
Erection questions test AISC 303 and field judgment. The erector owns means, methods, sequencing, temporary support, and safety; the EOR owns the design.
345 words, about 2 min06Quality Assurance, Inspection, and Testing of Steel Construction
This domain separates quality control (QC) from quality assurance (QA) . QC is the fabricator's and erector's own process control - their own inspectors, checks, and records, taken as a condition of doing the work.
346 words, about 2 min07Special Inspection, Documentation and Reporting
Special inspection is a building-code function, defined in IBC Chapter 17. The code requires the permit applicant to submit a statement of special inspections identifying which items require special inspection and who will perform them.
722 words, about 4 min