Meisterprüfung Kraftfahrzeugtechnik exam-day guide
Meisterprüfung Kraftfahrzeugtechnik · Prepare for the day ahead.
Your checklist
Personal ID document
Bring a valid photo ID (personalausweis or passport). The exact accepted documents and whether a second form is required must be confirmed with the provider (Handwerkskammer) in advance. needs_review
Admission letter and registration confirmation
Bring the written invitation/Zulassung to the exam. Check the stated time, room, and any candidate number on it. needs_review
Project/working documentation and required drawings
Bring the written documentation, calculations, and drawings required for the practical task in the prescribed number of copies and format; confirm the required copy count and binding with the provider. needs_review
Personal hand tools
Bring the hand tools you are used to working with, unless the provider supplies a standardized tool set. Clarify in advance which tools and measuring equipment are provided versus personally required. needs_review
Personal protective equipment
Safety shoes, work clothing, and eye/ear protection as appropriate to the task. Confirm whether PPE is provided or must be brought. needs_review
Diagnostic and measuring equipment
If you rely on your own multimeter, torque wrench, or diagnostic interface, confirm in advance that personal equipment is permitted in the exam workshop. needs_review
Writing materials and calculator
Bring pens, a ruler, and a non-programmable calculator. Confirm whether a specific calculator model is required or whether any programmable device is prohibited. needs_review
Printed standards and reference data
Bring any permitted tables, torque values, or standards extracts. Confirm which reference materials are allowed into the exam room; unmarked originals are usually safer than annotated copies. needs_review
Timekeeping
Bring a wristwatch so you can manage the time budget without relying on a phone, which may be prohibited or must be switched off. needs_review
Arrive early and locate the site
Recon the route to the exam workshop or test center the day before and plan to arrive well before the start time to allow for check-in and setup. needs_review
Food, water, and medication
Bring water and a light snack for longer practical blocks, plus any personal medication. Clarify break rules with the provider in advance. needs_review
Contact details of the provider
Save the phone number and email of the examination office so you can report delays or emergencies on the day. needs_review
Plan the day
Re-read the invitation and the task description. Confirm start time, location, room, permitted materials, and the required documentation format with the provider. Pack documentation and tools, check torque wrench calibration if you rely on your own, and do a dry run of the practical sequence on a similar vehicle or mock setup. Protect sleep and avoid last-minute cramming of new material.
Lay out clothing, PPE, ID, admission letter, tools, and documentation in one place. Charge any devices and check batteries in measuring equipment. Confirm transport and parking, set two alarms, and prepare food and water. Review only your own summary sheets and the task sequence, not new topics.
Eat a proper breakfast, arrive early, and complete check-in and ID verification. Set up your workstation, verify that tools and equipment are complete and functional, and read the full task sheet before starting. Note the official start time and the time budget for each phase, including documentation and cleanup.
Work in a fixed sequence: safety and setup first, then diagnosis or assembly, then measurement and verification, then documentation. Keep the workplace clean and organized, record measurements as you go rather than from memory, and reserve the final portion of the time for checking the result and completing the required written record. If a fault or missing tool occurs, report it immediately to the supervising examiner rather than improvising silently.
Rules to check
Carry valid photo identification at all times; the exact accepted documents and any second-form requirement must be confirmed with the provider before the exam.
Follow the examiner's instructions on permitted tools, reference materials, phones, and other electronic devices; when in doubt, ask before the task starts rather than after.
Work safely: use the prescribed PPE, observe workshop and machine safety rules, and stop and report any unsafe condition or equipment defect immediately.
Do not communicate with other candidates during the practical test and do not accept outside help; suspected collusion or unauthorized aids can lead to exclusion from the exam.
Break and refreshment rules during long practical blocks vary by provider; confirm the permitted break times and whether leaving the workshop area is allowed.
Scoring criteria and the weighting of the practical result within the overall examination are set by the applicable examination regulations; confirm the current weighting and pass requirements with the provider rather than relying on second-hand information.
If you fall ill or cannot attend, notify the examination office as early as possible and ask about withdrawal or rescheduling rules, since unexcused absence may be treated as a failed attempt.
Keep your documentation complete and your own work; the written record submitted with the practical task must reflect what you actually did and measured.