ID Electrician study plan

Map the NEC's nine chapters and state which chapter governs a given installation scenario using Article 90 and the table of contents

Define at least 40 Article 100 terms from memory and self-quiz to 90% accuracy

Use Chapter 9 Tables 1, 4, and 5 to size a raceway for a mixed conductor set

Trace five unfamiliar code questions to their exact article and section using only the index in under two minutes each

Compare NM, MC, EMT, IMC, PVC, and ENT by permitted use, securing, and support spacing from the Chapter 3 articles

Calculate box fill under 314.16 and raceway fill under Chapter 9 Table 1 for ten scenarios

Determine minimum cover depths and wet/damp/corrosive location limits for raceways and cables

Apply 310.15 adjustment and correction factors to more than three current-carrying conductors

Size standard overcurrent devices for branch circuits and feeders using 210.20, 215.3, and 240.4

Perform complete load calculations by both the standard and optional methods in Article 220

Apply 210.8 and 210.12 to decide GFCI and AFCI requirements by room and occupancy

Select conductor ampacities from Table 310.16 with termination limits applied

Distinguish grounding from bonding and state system grounding requirements for service equipment in Article 250 Parts I through III

Size grounding electrode conductors with Table 250.66 and equipment grounding conductors with Table 250.122

Select and install grounding electrodes using 250.50 through 250.53

Explain shock and arc-flash hazard controls, including approach boundaries and PPE selection

Size motor branch-circuit conductors, overload protection, and short-circuit protection using 430.22, 430.32, and Table 430.52

Compute full-load current from the Article 430 tables and apply 430.24 for multi-motor feeders

Size motor disconnects and interpret control circuit requirements in Article 430 Parts VI through IX

Apply Articles 440 and 450 to five HVAC and transformer scenarios

Outline Idaho's electrical license classes and the scope of work each class may perform, citing the governing statute and IDAPA rule

Locate and record the continuing education hours, renewal cycle, and fee schedule that apply to each license class

Describe contractor registration, apprentice registration, and journeyman-to-apprentice supervision requirements

Summarize the complaint, penalty, and disciplinary process in Idaho electrical law

Re-solve every item in the Week 4 error log with a written code citation until none remain unresolved

Complete 40 timed mixed questions from Domains 1, 3, and 4 at or above 85% accuracy

Drill calculation speed by finishing ten load, grounding, and overcurrent problems in 45 minutes

Memorize the fifteen most-tested NEC tables and state what question each one answers

Complete two full-length 80-question practice exams under timed conditions covering all six domains

Run rapid-fire review of Idaho statutes and motor calculations until scoring 100% on a 20-question quiz

Practice index lookups on twenty unfamiliar questions, averaging under 60 seconds each

Build a single exam-day sheet of the formulas, tables, and rule citations you most often miss