ID Electrician study materials
ID Electrician study resources

ID Electrician study guide

ID Electrician · Work through your exam, one topic at a time.

An Idaho electrician license is a credential issued by the Idaho Division of Occupational and Professional Licenses (DOPL), the state agency whose Electrical program page sits at dopl.idaho.gov/ele/. Idaho issues electrician credentials at more than one level - typically journeyman and master - and candidates qualify through a combination of documented work experience and a written licensing examination. The ID Electrician study guide has 6 sections and about 2,073 words.

01

General Electrical Knowledge and NEC Structure

The Code is arranged in nine chapters. Chapters 1 through 4 are the general rules (definitions, wiring and protection, wiring methods, general-use equipment).

358 words, about 2 min
02

Wiring Methods, Materials, and Installation Requirements

Every Chapter 3 article follows the same order: scope, uses permitted, uses not permitted, and installation requirements. Learn that template and unfamiliar articles become readable.

349 words, about 2 min
03

Overcurrent Protection, Branch Circuits, and Feeders

Article 240 requires each conductor to be protected at its ampacity. Section 240.4(D) sets hard caps regardless of ampacity: 14 AWG copper at 15 A, 12 AWG at 20 A, and 10 AWG at 30 A for most circuits.

351 words, about 2 min
04

Grounding, Bonding, and Electrical Safety

Grounded means connected to earth. Grounding is the earth connection itself.

347 words, about 2 min
05

Motors, Controls, and Special Equipment

Article 430 requires motor branch-circuit conductors and protection to be based on the table full-load current (430.247 through 430.250), not the nameplate amperes. Nameplate values are used for overload protection.

305 words, about 2 min
06

Idaho Electrical Licensing Statutes and Rules

Electrical licensing in Idaho is governed by state statute (Idaho Code Title 54, Chapter 10) and by rules administered through the Idaho Division of Building Safety with an electrical board providing industry oversight. Because the requirements are set by statute and rule rather than by city ordinance, the same license categories apply statewide, although local jurisdictions may contract for inspection services.

363 words, about 2 min