Automotive Body Repair & Painting NC II study guide
Automotive Body Repair & Painting NC II · Work through your exam, one topic at a time.
The Automotive Body Repair & Painting NC II is a Philippine national certificate for entry-level work in collision repair and refinishing shops. It suits trainees and working helpers who want formal recognition of their skills in panel beating, body filler application, panel replacement, surface preparation, masking, and spray painting, along with the safety and housekeeping habits shops expect. The Automotive Body Repair & Painting NC II study guide has 8 sections and about 1,937 words.
01Workplace Communication and Occupational Health and Safety
Effective body-shop communication is both verbal and written: job cards, repair orders, damage reports, and handover notes must be accurate, legible, and complete. Use clear, respectful language, confirm instructions by repeating them back, and escalate uncertainties to the supervisor rather than guessing.
292 words, about 1 min02Hand Tools, Power Tools, and Measuring Instruments
Body hammers, dollies, spoons, picks, and slappers move metal; files, body rasps, and sanding blocks shape it. Match the tool to the job: a pick and file for finishing, a slapper for broad low spots.
270 words, about 1 min03Panel Preparation, Damage Assessment, and Metal Finishing
Classify damage as direct (impact area) and indirect (transferred damage). Check for stretch, kinks, and misalignment.
254 words, about 1 min04Body Panel Replacement, Alignment, and Structural Repair
Understand bolt-on versus welded panels. Bolt-on panels (fenders, doors, hoods) use fasteners and alignment shims; welded panels (quarter panels, rockers) require cutting, plug welding, and seam sealing.
236 words, about 1 min05Surface Preparation, Masking, and Paint Mixing
Wash, degrease, and sand before painting. Know grit progression: 80–180 for primer prep, 320–400 for topcoat prep, and finer for blend panels.
251 words, about 1 min06Spray Painting Application, Finishing, and Defect Correction
Spray gun settings: fluid, air, and fan pattern. Hold the gun perpendicular to the surface at a consistent distance (typically 15–20 cm).
229 words, about 1 min07Vehicle Reassembly, Quality Inspection, and Housekeeping
Reinstall trim, lights, glass, and hardware in reverse order of removal. Check torque values for fasteners and use new clips where specified.
228 words, about 1 min08Materials, Consumables, and Waste Handling
Know categories: abrasives (paper, discs, belts), fillers (body filler, glazing putty), primers, paints (basecoat, clearcoat), reducers, hardeners, sealers, and adhesives. Understand shelf life and storage conditions - many products are temperature-sensitive and moisture-sensitive.
177 words, under 1 min